Disclaimer:- TechBuddies Online is an independent software technical support service provider for a large variety of third party products, brands and services. Any use of Trademarks, Brands, Products and Services is referential and TechBuddies has no affiliation with any of these third-party companies unless such relationship is expressly specified.
How to Configure Netgear WNDR4500 N900 Wireless Dual-Band Gigabit Router
In my previous
post, I wrote about default password for Netgear devices. In this post, I am
going to walk you through the configuration procedure of the latest WNDR4500
Wireless N900 Dual-Band router. It’s an excellent device for wireless home
network setup, fast Internet access over a DSL line, guest network setup, and
USB storage among other things. Check the steps given below and configure your
Netgear WNDR4500 router: (See Also Netgearroutersupport)
1. Before you begin, make sure that you
have your ISP’s login details viz. username and password to connect to the
Internet on your Netgear router. Also keep the router’s username and password
handy. You will find it on the Netgearroutersetup documentation or the bottom of the
2. Connect your router to your DSL modem
and to the computer using Ethernet cables.Refer to the Netgear documentation if you need assistance making the
connection. When connected, turn on your Netgear router, computer, and the
modem and wait till they boot up.
3. When done, insert the Netgear
installation disk and follow the on-screen instructions (self-explanatory).
Since you are setting up your router for the first time, you might Network
Genie, an auto assistant to help you perform the setup and various other
4. It’ll take about 15 minutes or so to completetheinstallation. Once you have completed the setup and
connected to the Internet, your router check for all the latest, available updates.
Wait while all the updates are duly installed.
5. When done, reboot your router and other
devices and connect to the wireless network or set up guest network etc. If you
immediately want to configure your settings without the installation disk, open
your web browser and type ‘192.168.0.1’ in the address bar and hit Enter.
6. When prompted, enter your router’s
default login details and click OK or Submit whichever you see on the
screen to proceed. Now configure your settings as desired. You can set up a
custom password, wireless network or miscellaneous settings for your home
network. (See Also how to configureLinksysE1200 Wirelessrouter)